Finalizing The Installation - FireplaceXtrordinair 36DV-A/R Owner's Manual

F
INALIZING THE
P 22
AGE
c Follow the directions below to install the burner pan and attach the piezo igniter wire.
Install the burner pan, tilting the burner
c
forward to allow the gas control valve
to insert without damage.
Front of Fireplace
(with setup face removed)
7/16Ó
Socket
Use the six nuts
included with the kit to
d
attach the burner pan.
Route the brown and red
wires to the front (these wires
are from the on/off switch).
d Attach the brown and red wires from the on/off switch to the gas control valve.
I
NSTALLATION
Flex
Tube
a
Gas Control Valve
PILOT ADJ
(C .)
ONT
- For Qualified Installers Only!
Gas Control Valve
Piezo Igniter
Brown Wire
Burner Pan
b
Attach the orange wire
from the burner pan to
the piezo igniter.
Red Thermopile Wire
(leave attached)
White Thermopile Wire
(leave attached)
Red Wire
Base of Fireplace