Glass Removal (& Installation) - FireplaceXtrordinair 36DV-A/R Owner's Manual

Built-in direct vent fireplace natural gas or propane residential or mobile home
Hide thumbs Also See for 36DV-A/R:
Table of Contents

Advertisement

F
INALIZING THE
P
20
AGE
2 Remove the glass following the instructions below.
To remove the glass:
(1)
Locate the #3 square
driver (included with the
owner's pack)
(2)
Remove the glass clips
on the top and sides of
the glass, holding the
glass to insure it does not
fall forward
(3)
Loosen the glass clip on
the bottom
(4)
Slide the glass up and
away from the bottom
glass clip
Use the #3 square
driver for the screws
TOP VIEW
Glass
Clip
Glass
Gasket
Glass Clip
Screws
Front of fireplace with
To install the glass:
(1)
Locate the #3 square driver (included with the owner's pack)
(2)
Place the bottom glass clip in place and screw the 5 screws that hold it in place a couple of turns
(3)
With the glass gasket in place, position the glass on the bottom glass clip (if the glass is cracked or broken, replace)
(4)
Install the side and top glass clips, tightening the screws only a couple of turns
(5)
Adjust the glass so it is centered
(6)
TIghten the screws on the glass clips all the way (screws must bottom out)
I
NSTALLATION
Bracket for
securing the
faceplate
Glass Clip
Glass
Glass Gasket (fits
around edge of glass)
Glass
Use only Travis Industries
supplied gasket.
Use a #3 square
driver for these
screws (included
in owner's pack)
Face of
Firebox
36DV-R
faceplate removed
(C
.)
ONT
- For Qualified Installers Only!
36DV-A
Front of fireplace with
faceplate removed
Front of
Fireplace

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents