Installation; Installation Preparation; Packing List; Additional Items Required For Installation - FireplaceXtrordinair 36DV-A/R Owner's Manual

I
NSTALLATION
P 6
AGE

Installation Preparation

! Failure to follow all of the requirements may result in property damage, bodily injury, or even
death.
! This appliance must be installed in accordance with all local codes, if any; if not, follow ANSI
Z223.1 and NFPA 54(88).
! In Manufactured or Mobile Homes must confirm with: In USA, Manufactured Home
Construction and Safety Standard, Title 24 CFR, Part 3280; In Canada, CSA Z240.4 and Gas-
Equipped Recreational Vehicles and Mobile Housing. This appliance may be installed in
Manufactured Housing only after the home is site located.
! The 36DV is designed to operate on natural gas, or propane (LP).
! All exhaust gases must be vented outside the structure of the living-area. Combustion air is
drawn from outside the living-area structure.
! Notify your insurance company before hooking up this fireplace.
! The requirements listed below are divided into sections. All requirements must be met
simultaneously. The order of installation is not rigid Ð the qualified installer should follow the
procedure best suited for the installation.

Packing List

¥ #3 Square Driver
¥ Log Set (2 Logs, 2 Twigs, Bag of Coals, Coal
Trays)
¥ Flex Tube with Pipe Adapter

Installation Overview

4-1/2" Min.
Non-combustible
facing (see the
section "Facing
Requirements")
See the section
"Mantel Requirements"
- For Qualified Installers Only!

Additional Items Required for Installation

Drywall
See the section
"Hearth Requirements"
See the section "Fireplace
Placement Requirements"
¥ Burner Pan Kit (Natural Gas or Propane)
¥ Gold or Black Faceplate (includes attachment screws)
¥ Direct Vent (Simpson Dura-Vent Ph. # 800 835-4429)
¥ Gas Line Equipment (shutoff valve, pipe, etc.)
¥ Electrical Connection Equipment (min. 18 gauge, grounded line)
See the section
"Vent Requirements"
Nail
Down
Plate
See the section
"Gas Line Installation"
See the section
"Horizontal Termination
Requirements"
See the
section
"Acceptable
Vent Lengths"
Insulation must not fill
the spaces between
the stand-offs
See the section
"Electrical
Connection"
See the section
"Minimum Framing
Dimensions"