Memory Cards - Kyocera FS-7000 User Manual

Memory Cards

Memory Cards

Inserting Memory Cards
2-32
This printer is equipped with memory card slots. This allows, for example, the use of fonts other than
internal fonts by using an optional font card. If a JEIDA Ver. 4.2 memory card is used, it is possible
to read, write and delete data and format the memory card.
Note ____________________________________________________________________
Only 32 MB or less flash or S-RAM type memory cards conforming to JEIDA Ver. 4.2 can be written
or formatted by this printer.
It is possible to set the partitions on the memory card which you wish to execute for the printer at
power-on by using the PRESCRIBE FRPO I0 command. For details on the FRPO command, see
Appendix C.
Font cards can be read from the control panel or read automatically upon power-on or printer reset
when a font card is inserted in the printer.
Carefully insert the memory card as far as it will go with the top side facing right (back side of the
printer).
Memory Card Slot
Memory Card