Colored Paper; Preprinted Paper - Kyocera FS-7000 User Manual

Special Paper

Colored Paper

Preprinted Paper

Overhead Projection (OHP) Film
B-10
Specifications for each type of special paper are given below.
Colored paper should meet the same specifications as listed for white bond paper in page B-3. In
addition, the pigments used in the paper must be able to withstand the temperature of the printer's
fusing process (200° C).
The paper base of preprinted paper should meet basic specifications. The preprinted ink must be able
to withstand the temperature of the printer's fusing process (200° C), and do not use paper with any
kind of surface treatment, such as the type of paper commonly used for calendars.
OHP film must be able to withstand the heat of fusing during the printing process. Specifications are
as follows.
OHP Film Specifications
Item
Tolerance of heat
Thickness
Material
Squareness of corners
Notes ___________________________________________________________________
•
Feed OHP film one at a time from the MP tray.
•
Do not use film made from anything other than polyester.
Specification
Must be able to withstand the temperature of the
printer's fusing process (200°C).
0.100 to 0.110 mm (3.9 to 4.3 mils)
Polyester
90° ±0.2°