Environmental Requirements Of The Page Printer - Kyocera FS-7000 User Manual

Environmental Requirements of the Page Printer

Environmental Requirements of the Page Printer

Places to Avoid
Basic requirements
1- 2
Avoid installing the printer in locations subject to:
•
Direct drafts of hot or cold air
•
Direct drafts from outside (Avoid locations near doors leading outside.)
•
Sudden temperature or humidity changes
•
Sources of high temperature, for example, near stoves or radiators
•
Excessive dust
•
Vibration
•
Ammonia or other harmful fumes. (If you are planning to fumigate the room, or make liberal use of
insecticide, remove the printer first!)
•
Excessive sunlight or humidity
•
Lack of ventilation
•
Low air pressure, e.g., located more than 2000 meters (6500 feet) above sea level
The printer will work best if it is installed in a location that is:
•
Near the computer
If the parallel interface is used to connect the printer to the computer, the connecting cable should
be shielded type and not be longer than 3 meters (10 feet).
•
Level and well supported
Place the printer on a sturdy table or desk. Do not place the printer on an unstable cart, stand, or
table. The printer may fall, causing injury, or serious damage to the printer.