Resource Protection - Kyocera FS-7000 User Manual

Resource Protection

Resource Protection

2-48
When you switch from the HP LaserJet 5Si emulation to another, all downloaded fonts and macros
are lost. Resource protection preserves these PCL resources in memory so that they are intact when
you change the emulation back to HP LaserJet 5Si.
By using the printer's >Resource prot., you can select from two resource protection modes
as follows:
>Resource prot.
Permanent
In this mode, the printer stores fonts, macros, symbol sets, etc. in memory that were downloaded as
permanent PCL resources. All temporary resources are lost when the emulation mode is changed
from HP LaserJet 5Si to another or vice versa.
>Resource prot.
Perm / Temp
In this mode, the printer stores both permanent and temporary resources when the emulation mode is
changed from HP LaserJet 5Si to another or vice versa.
Note ____________________________________________________________________
The printer requires 10 MB or more of memory in order to set resource protection.