Kyocera FS-7000 User Manual page 118

KIR Level
2-46
KIR Setting
Optimized stripes
Dark vertical stripes
White vertical stripes
Status page
KIR Checking Lines
Description
The current KIR setting is optimal.
The KIR mode currently set is too strong. Set the KIR mode to Light or
Medium . Try printing the test pattern again. If you still get dark vertical
stripes, adjust the print density control to a lighter setting. (See the Mode
Select Menu at the end of this manual.)
The KIR mode currently set is too weak. Set the KIR mode to Medium or
Dark . Try printing the test pattern again. If you still get white vertical
stripes, adjust the print density control to a darker setting. (See the Mode
Select Menu at the end of this manual.)