Kyocera FS-7000 User Manual page 202

Thick Paper/Postcards
Envelopes
Use postcards weighing 90 to 200 g/m
used. Avoid using homemade postcards, picture postcards or postcards whose printing surface has
been coated. Do not use paper which has a rough cut.
When using paper which is slightly curled or paper which is printed on one side be sure to slightly curl
the paper upward as shown in the figure.
Feed direction
Envelopes made from paper weighing 60 to 79 g/m
Envelopes are not of even thickness due to their folded construction. It therefore may not be possible
to print evenly on an envelope surface in some cases. Envelopes which are particularly thick may
wrinkle as they come out of the printer. Test a sample envelope on the printer and check that printing
quality is satisfactory before purchasing.
Envelopes with exposed adhesive cannot be used regardless of their type. Envelopes which use
peel-off strips to cover adhesive also cannot be used as this little strip coming off inside the printer
can result in major damage.
Envelopes which have been specially treated also cannot be used. For example, envelopes with
string attached for sealing , envelopes with open windows, and envelopes with film covered windows
cannot be used with this printer.
2
. Any postcards of size 100 mm by 148 mm or larger may be
Feed direction
2 may be printed using this printer.
Appendix B Paper Selection
B-11