Kyocera FS-7000 User Manual page 70

Expanding Memory
1- 46
3. Remove the SIMM or SIMMs from the package.
Align the connector side of the SIMM with the socket groove paying attention to the left
1
and right sides of the SIMM.
Gently push both sides of the top edge of the SIMM into the groove and gently push it
2
upright. Check that both edges of the SIMM are being held in place by the catches on
the socket.
SIMM
Socket
Catch
Note ____________________________________________________________________
SIMMs may be installed in either slot regardless of their memory capacity.
Catch
1
2