Operating Procedures
Switching Power On
2-12
Check that the power cord is securely plugged in at both ends. Check that the printer is connected to
the computer (See page 1-25).
Push the power switch to the ON ( | ) position.
1.
Power Switch
Wait for the printer to warm up. During warm-up the message display indicates Self test.
2.
At the end of the warm-up period, the ON LINE indicator lights, and the message display
3.
indicates Ready.
The printer is now ready to print.
Note ____________________________________________________________________
If an error is detected while the printer is warming up, the ATTENTION indicator will light. A message
concerning the error will be displayed in the message display. (See Chapter 4.)