Kyocera FS-7000 User Manual page 85

Basic Printing Operations
The flow of basic operations to print is given below. Keys on the control panel are explained after
that. For details on using the MODE key, be sure to read the section "Mode Select Menu" at the end
of this manual in conjunction with this section.
Use the MODE key to set an emulation for the printer which conforms to the software being
1.
used.
This printer is shipped from the factory with emulation set to HP LaserJet 5Si.
Use the MODE key to select the font to use and paper direction.
2.
Use the FEED key to select paper feeding from the cassette or the multi-purpose tray.
3.
Use the STACK key to select the destination output tray.
4.
Use the MODE key to set the number of printed copies.
5.
Check that the message Ready appears in the message display and that the ON LINE
6.
indicator lights, then make preparations to print from the computer.
Press the FORM FEED key if, after printing, the message Waiting appears in the message
display.
Chapter 2 Operating the Page Printer
2-13