Kyocera FS-7000 User Manual page 87

Feed Selection
Use the FEED key to select whether to feed paper from one of the paper feed cassettes or from the
multi-purpose tray. If optional paper feeders (PF-30 or EF-1/UF-1) are installed, any of these can
also be selected.
The FEED key can be used whenever the message display indicates Ready or Add paper.
Press the FEED key. The selection cycles and is momentarily displayed in the message display as:
Cassette 1
Cassette 2
Cassette 3
Cassette 4
Cassette 5
Cassette 6
MP tray
Universal feeder
The cassette indicator corresponding to the selected cassette on the control panel will flash.
Selecting the paper feeder (PF-30) cassette will also light the ready indicator on the front of that
cassette.
Paper feed selections can also be made using the PRESCRIBE II PSRC command.
Chapter 2 Operating the Page Printer
(Paper feeder's top cassette)
(Paper feeder's bottom cassette)
(Displayed when an optional feeder is installed [upper
cassette])
(Displayed when an optional feeder is installed [lower
cassette])
(Displayed when a second optional feeder is installed [upper
cassette])
(Displayed when a second optional feeder is installed [lower
cassette])
(Printer's multi-purpose tray)
(Displayed when an EF-1 or UF-1 is installed)
2-15