Copying Problems; Unable To Copy - Fuji Xerox DocuCentre S2010 User Manual

Copying Problems

This section provides possible solutions to various problems you may encounter when
using the Copy features.

Unable to Copy

The table below lists possible solutions when you are unable to copy.
Symptom
The document is
not fed properly
through the
document
feeder.
Possible Cause
The document size is too
small.
The document is not a
supported type.
The document guides are
misaligned.
There are document shreds
stuck in the document
feeder.
You have placed a
document containing pages
of different sizes.

Copying Problems

Remedy
The minimum size of document that can be
loaded on the document feeder is A5
The document feeder does not support
warped documents, business cards,
transparencies, thin documents,
or documents with attached stick-on notes,
paper clips or tape.
Refer to "Paper Types" (P.70).
Align the document guides properly to
match the document size.
Open the document feeder cover, and
remove the document shreds.
Refer to "Document Jams" (P.184).
You cannot place documents with different
size pages.
.
11
159