Print Output Problems - Fuji Xerox DocuCentre S2010 User Manual

Print Output Problems

The table below lists possible solutions to print output problems.
Symptom
The printout is on
the wrong paper
size.
The image at the
edges of the
paper is missing.
The settings
specified in the
printing options
are disabled.
The computer is
not using the
print driver
supplied with the
machine (is
using another
company's print
driver).
Possible Cause
The wrong size paper was
loaded in the specified tray.
The document exceeds the
machine's printable area.
The print driver of another
model machine is in use.
An option has not been
mounted.
Confirm whether the print
driver on the computer is
the one supplied with the
machine.
Remedy
Change the size of the paper loaded in the
tray, or change the print options to use a
tray containing the specified paper size.
Enlarge the machine's print area, or reduce
the document's print area.
Install the machine's print driver.
Check the options mounted in the
machine, then reselect the items in [Items]
under [Options] in the print driver.
On the computer, select the print driver
supplied with the machine. If the print driver
is not listed for selection, install the print
driver and then select it. Operation is not
guaranteed if another company's print driver
is used.
Printer Problems
11
163