Printing Reports - Fuji Xerox DocuCentre S2010 User Manual

9 Machine Status

Printing Reports

The machine can print the following reports:
System Settings Report
Service Settings Report
Job History Report
Error History Report
Job Counter Report
Note
9
Follow the steps below to print a report.
1
Enter the System Administration mode.
Refer to "Enter the System Administration Mode" (P.114).
2
Enter the program number "202", and press the <Start> button.
3
Enter the number of the report that you want to print, and press the <Start> button.
1
2
3
4
5
132
Report
Prints the machine's hardware configuration, version information,
status of consumables, number of pages printed by each feature,
the items that can be set by CentreWare Internet Services, and
their values.
Prints the items that can be set from the control panel in the
System Administration mode.
Shows the job execution results. Prints the results of the most
recent jobs (up to 10 jobs' worth).
Note
Prints information on errors generated in the machine. Up to 42
errors are recorded sequentially from newest to oldest. Records
information on up to 10 paper jams or similar errors.
Note
Prints the total number of pages printed by each feature, along
with tallies such as the copy total and permitted maximum number
of copies by each user in multiple account mode.
• The items printed will vary according to the machine's settings.
Number
System Settings Report
Service Settings Report
Job History Report
Error History Report
Job Counter Report
Description
• When the Job History exceeds 10 jobs, each new job
replaces the oldest job in the history.
• When printed a job (single page job) continuously, the error
information of the jammed page may not be recorded.
• The Error History may record less than 42 errors if it contains
errors with a large amount of information. When the Error
History exceeds its capacity, each new error recorded
replaces the oldest error.
Description