Sharpness; Background Suppression; Erase Frame - Fuji Xerox DocuCentre S2010 User Manual

1
Press the <Pages per Side> button to select
the desired copy method.
2
When using the document glass and all
documents have been scanned, press the
<Last Original> button.
This step is necessary when the <Last
Original> button is blinking.

Sharpness

You can adjust the image sharpness to any of 5 levels.
You can set the sharpness in the System Administration mode. For more information,
refer to "Feature Settings" (P.126).

Background Suppression

You can set the background suppression level.
When this feature is enabled, the document's background noise is removed during
copying. When this feature is disabled, the document's background noise is not
removed.
You can set the background suppression in the System Administration mode. For more
information, refer to "Feature Settings" (P.126).

Erase Frame

You can set to erase the black shadows created around the edge of the paper when
copying with the document cover open or copying a bound document.
You can set a value between 0 and 50 mm (in 1 mm increments) for the Erase Frame
feature.
Off
Disables the Pages per Side feature.
2 Pages
Copies 2 documents on a single page.
4 Pages
Copies 4 documents on a single page.
Advanced Copy Settings
<Pages per Side> button
<Last Original> button
5
97