Paper Types; Supported Paper Weights And Sheet Counts - Fuji Xerox DocuCentre S2010 User Manual

4 Loading Paper

Paper Types

This section describes the paper types supported by the machine.
Use of non-recommended paper types may result in paper jams, lower print quality,
malfunctions, or damage to the machine. To achieve optimum machine performance,
use only paper types recommended by Fuji Xerox.
If you desire to use paper other than the paper recommended by Fuji Xerox, contact
our Customer Support Center.
Do not use conductive paper such as origami paper, carbonic paper or
conductively-coated paper. When paper jam occurs, it may cause short-circuit and
eventually a fire accident.
Important • Moisture generated by water, rain, or vapor may cause the printed images to fade. For more

Supported Paper Weights and Sheet Counts

4
Tray 1 (standard)
Tray 2
(One Tray Module
(optional))
Bypass tray
1
* : When using 80 gsm paper
2
* : When using Fuji Xerox standard paper
Important • Paper jams may result if you attempt to print on a different paper type or size than the type
Note
Supported paper sizes:
Maximum: A3, 11 × 17"
Minimum: Tray 1 and 2: B5, Bypass tray: A5, 5.5 × 8.5"
70
WARNING
information, contact our Customer Support Center.
Paper Tray
60 to 90 gsm
Ream Weight: 51.6 - 77.4 kg
60 to 90 gsm
Ream Weight: 51.6 - 77.4 kg
60 to 110 gsm
Ream Weight: 51.6 - 94.6 kg
or size selected in the print driver, or from a tray that does not support the loaded paper.
Select the correct paper size, type, and tray to ensure successful printing.
• Basis weight is the weight of one sheet of paper of 1 m
• Ream weight is the weight of 1,000 sheets of duodecimo size (788 × 1,091 mm) paper.
Basis Weight/Ream Weight Loadable Quantity
1
250 sheets *
(Up to 27 mm)
1
500 sheets *
(Up to 54 mm)
2
100 sheets *
(Up to 10 mm)
2
in size.