Using The Ethernet Interface - Fuji Xerox DocuCentre S2010 User Manual

2 Environment Settings

Using the Ethernet Interface

The machine supports 100BASE-TX and 10BASE-T Ethernet interfaces.
Note
To connect the Ethernet interface:
1
Press the power switch to the [ ] position to
turn the power OFF.
Note
2
2
Connect a network cable to the Ethernet
interface connector.
Note
3
Press the power switch to the [ | ] position to
turn the power ON.
30
• The Ethernet interface is available when the Simple Network Print Kit is installed on the
machine.
• Check the display of the status machine
diagram is turned off.
• Prepare a network cable suitable for your
network connection. When you replace the
network cable, contact our Customer
Support Center.