Loading Paper In Bypass Tray - Fuji Xerox DocuCentre S2010 User Manual

4 Loading Paper
2
For Tray 1, push down the metal plate to the
bottom of the tray.
3
Load the paper with the side to copy or print
on facing up. Align the leading edge of the
paper with the left side of the tray.
Important • Do not load paper above the maximum fill
4
Push the tray in gently until it stops.
4
Important • When pushing the tray in, do it slowly. If the tray is pushed with too much force, it might

Loading Paper in Bypass Tray

When printing or copying on the paper that cannot be set in Tray 1 or 2, use the Bypass
tray.
The following describes the procedure for loading paper into the Bypass tray. For
printing, specify the settings on the [Paper/Output] tab using the print driver. Also
specify the type of paper to be loaded.
Important • To prevent paper jams or loading errors, do not remove paper from its packaging until
Note
1
Open the Bypass tray.
Note
76
line. It might cause paper jams or machine
malfunctions.
• Do not place any paper or objects in the
empty space on the right side of Tray 1 or 2.
It may cause paper jams or machine
malfunction.
cause machine malfunctions.
• Push the tray in all the way until it stops to prevent paper jams.
needed.
• Fan the paper well before loading paper in a tray. It prevents paper from sticking to each
other and reduces paper jams.
• If necessary, pull out the extension tray. Pull
out the extension tray gently.