Buell Blast 2014 Service Manual page 344

HOME
Measure Voltage On Connector [134B] Between Socket C, (GY), And Socket B, (BK).
7-10 2004 Buell P3: Electrical
3.0-3.5 VDC
Is Voltage 11-13 VDC?
YES
Is Bank Angle Sensor
Correctly Installed?
YES
Are Ferrous Metals Located Within 0.250 in. (6.4 mm)
Of Sides, Face, Or Top Of Bank Angle Sensor?
YES
Return To Original
Configuration.
Figure 7-8. Continuous or No Spark At Spark Plug
NO
Repair Open In (GY) Wire Between Bank Angle
Sensor And Ignition Fuse.
NO
Install Properly.
NO
Replace Bank Angle Sensor.
5013
5007