Buell Blast 2014 Service Manual page 165

HOME
7648
Figure 3-6. Hose Clamp
15. See Figure 3-6. Loosen hose clamp.
7649
1
1. Breather hose
2. Three-way connector
Figure 3-7. Crankcase Breather Hose
16. See Figure 3-7. Remove crankcase breather hose.
3-10 2004 Buell P3: Engine
7631
2
1. Auto-enrichener plug
2. Frame
17. See Figure 3-8.
18. Place air cleaner and carburetor as an assembly on top
of frame.
For more details about the air cleaner see
CLEANER.
The steps mentioned previously complete disassembly
preparation for top end servicing. You may now proceed
with TOP END DISASSEMLY PROCEDURES. See
CYLINDER
2
If continuing engine removal proceed to step 20.
The remaining steps are required to complete engine
removal.
19. Place jack under the motor. Use jack to lower motor.
20. Move jack forward.
21. Place wooden cradle under engine.
Figure 3-8. Auto-Enrichener Plug
Disconnect auto-enrichener plug.
NOTES
HEAD.
NOTE
1
4.3 AIR
3.5