Buell Blast 2014 Service Manual page 168

HOME
7650
Figure 3-11. Hoisting Bike
28. See Figure 3-11. Place a floor hoist behind the lift. Attach
straps to frame and hoist. Raise hoist until straps tighten.
29. Remove rear shock.
ABSORBER.
7718
Figure 3-12. Loosen Clamp
30. See Figure 3-12. Loosen nut on hose routing clamp.
See 2.15 REAR SHOCK
7634
1
1. Oil return
2. Transmission vent
3. Crankcase vent
4. Oil feed
Figure 3-13. Disconnect Lines
31. See Figure 3-13. Disconnect feed, return, transmission
and crankcase vent lines.
7623
Figure 3-14. Removing Rear Motor Mount Bolts
32. See Figure 3-14. Remove rear motor mount bolts.
4
2
3
2004 Buell P3: Engine 3-13