Buell Blast 2014 Service Manual page 128

HOME
ASSEMBLY
1. Coat the slide bushing with fork oil or sealing grease.
3782
Figure 2-79. Install Slide Bushing
2. See Figure 2-79. Install slide bushing onto the slider
tube.
3794
Figure 2-80. Damper Assembly
3. See Figure 2-80. Install damper assembly and rebound
spring into slider tube.
3791
Figure 2-81. Lock Piece
4. See Figure 2-81. Install lock piece into damper.
3792
Figure 2-82. Clamping the Slider Assembly
5. See Figure 2-82. Clamp the slider assembly in a vise
with front fork holding tool (Part No. B-41177).
2004 Buell P3: Chassis 2-49