Uconnect® Settings; Buttons On The Faceplate - Dodge Challenger 2015 Operating Information Manual

Hide thumbs Also See for Challenger 2015:

Table of Contents

• If the menu is exited before the end of codes

is reached - when the driver re-enters the list

will be restarted from the beginning.

• When no codes are present or the last code

is reached = (P000) and this message is

• "No Further or End of Diagnostic Codes"

Uconnect® SETTINGS

The Uconnect® system uses a combination of

buttons on the touchscreen and buttons on the

faceplate located on the center of the instru-

ment panel that allows you to access and

change the customer programmable features.

Uconnect® 5.0 Buttons On Touchscreen And

Buttons On Faceplate

1 — Uconnect® Buttons On The Touchscreen

2 — Uconnect® Buttons On The Faceplate

Uconnect® 8.4 Buttons

1 — Uconnect® Main Menu Buttons On The

Buttons on the faceplate are located below the

Uconnect® system in the center of the instru-

ment panel. In addition, there is a Scroll/Enter

control knob located on the right side. Turn the

control knob to scroll through menus and

change settings (i.e., 30, 60, 90), push the

center of the control knob one or more times to

select or change a setting (i.e., ON, OFF).

Chapters

Table of Contents