Dodge Challenger 2015 Operating Information Manual page 145

Hide thumbs Also See for Challenger 2015:
Table of Contents

Advertisement

Auto Comfort Systems — If Equipped
After pressing the "Auto-On Comfort & Remote
Start" button on the touchscreen the following
settings will be available:
• Auto-On Driver Heated/Ventilated Seat &
Steering Wheel With Vehicle Start — If
Equipped
When this feature is selected the driver's heated
seat and heated steering wheel will automatically
turn ON when temperatures are below 40° F (4.4°
C). When temperatures are above 80° F (26.7° C)
the driver vented seat will turn ON. To make your
selection, press the "Auto Heated Seats" button
on the touchscreen then select either "Off," "Re-
mote Start" or "All Starts." Press the back arrow/
Done button on the touchscreen to return to the
previous menu.
Engine Off Options
After pressing the "Engine Off Options" button
on the touchscreen the following settings will be
available.
142
• Headlight Off Delay
When this feature is selected, the driver can
choose to have the headlights remain on for 0,
30, 60, or 90 seconds when exiting the vehicle.
To change the Headlight Off Delay status press
the "Headlight Off Delay" button on the touch-
screen and select from "0," "30," "60," or "90"
buttons on the touchscreen to select your de-
sired time interval. Press the back arrow/Done
button on the touchscreen to return to the
previous menu.
• Engine Off Power Delay
When this feature is selected, the power win-
dow switches, radio, Uconnect® phone system
(if equipped), DVD video system (if equipped),
power sunroof (if equipped), and power outlets
will remain active for up to 10 minutes after the
ignition is cycled to OFF. Opening either front
door will cancel this feature. To change the
Engine Off Power Delay status press the "En-
gine Off Power Delay" button and select from "0
seconds," "45 seconds," "5 minutes" or "10
minutes" buttons on the touchscreen. Press the
back arrow/Done button on the touchscreen to
return to the previous menu.
Compass Setting — If Equipped
After pressing the "Compass Settings" button
on the touchscreen the following settings will be
available.
• Variance
Compass Variance is the difference between
Magnetic North and Geographic North. To com-
pensate for the differences the variance should
be set for the zone where the vehicle is driven,
per the zone map. Once properly set, the com-
pass will automatically compensate for the dif-
ferences, and provide the most accurate com-
pass heading.
NOTE:
Keep magnetic materials away from the top
of the instrument panel, such as iPod's,
Mobile Phones, Laptop Computers and Ra-
dar Detectors. This is where the compass
module is located, and it can cause interfer-
ence with the compass sensor, and it may
give false readings.

Advertisement

Table of Contents
loading

Table of Contents