Dodge Challenger 2015 Operating Information Manual page 135

Braking Distance
When selected, this screen displays the vehi-
cle's braking distance and the speed at which
the brake pedal was depressed.
• This feature will only function when applying
the brakes at speeds above 30 mph
(48 km/h).
• Engaging the parking brake will disable this
feature.
• The word "READY" will display when condi-
tions are met for the event to begin.
• The distance and speed measurements dis-
play while the event is taking place.
• The distance measurement will be aborted if
the brake pedal is released before the ve-
hicle comes to a complete stop.
• The distance and speed measurements will
continue to display until the OK button is
pushed.
• Pushing the OK button will clear the current
run and prepare the cluster to record a new
run.
132
Current G-Force
When selected, this screen displays the current
G-Force (lateral and longitudinal) that displays
the directions of the forces.
Peak G-Force
When selected, this screen displays all four
G-Force values (two lateral and two longitudi-
nal).
• When a force greater than zero is measured,
the display will update the value as it climbs.
As the G-Force falls, the peak forces will
continue to display.
• Pushing the OK button will clear the peak
force values.
Lap Timer
When selected the Lap Timer page will show
the timer always at 0:00.00 with the previous
Best and Last time data (unless the driver has
cleared it via hold to Reset).
• Pushing OK will start "current" timer from
0:00.0
• When OK is pushed the times are updated
accordingly.
• As soon as the driver exits the Lap Timer
pages the "current" timer will stop and the
time will be reset to 0:00.00
• If the driver stays on the Lap Timer pages the
"current" timer will reset to 0:00.0 when igni-
tion is placed in the off position, or ignition
placed in the ON position (or will roll over at
59:59.99 if ever possible).
• Each time the driver pushes OK for a Lap
that current time populates the Last time and
also populates the 1st (top) space on the
Timer History page the current time resets to
0:00.0 at every push of the OK button.
• The timer will stop when the driver navigates
away from this page.
Lap History
When selected, this screen displays the Lap
History, and will color highlight the time that is
the best time from the Timer Page.
• Each time the driver presses the OK button
(while on the Lap Timer page) the current
Lap Time populates the 1st spot and the rest
of the data shifts down.