Dodge Challenger 2015 Operating Information Manual page 156

onds," "45 seconds," "5 minutes" or "10 min-
utes." Press the back arrow button on the
touchscreen to return to the previous menu.
Audio
After pressing the "Audio" button on the touch-
screen the following settings will be available.
• Balance/Fade
This feature allows you to adjust the Balance
and Fade settings. Press and drag the speaker
icon, use the arrows to adjust, or tap the 'C' icon
to readjust to the center. Press the back arrow
button on the touchscreen to return to the
previous menu.
• Equalizer
This feature allows you to adjust the Bass, Mid
and Treble settings. Adjust the settings with the
"+" and "–" setting buttons on the touchscreen
or by selecting any point on the scale between
the "+" and "–" buttons on the touchscreen.
Press the back arrow button on the touchscreen
to return to the previous menu.
NOTE:
Bass/Mid/Treble allow you to simply slide
your finger up or down to change the setting
as well as press directly on the desired
setting.
• Speed Adjusted Volume
This feature increases or decreases volume
relative to vehicle speed. To change the Speed
Adjusted Volume press the "Off," "1," "2" or "3"
button on the touchscreen. Press the back
arrow button on the touchscreen to return to the
previous menu.
• Surround Sound — If Equipped
This feature provides simulated surround sound
mode. To make your selection, press the "Sur-
round Sound" button on the touchscreen, select
"On" or "Off." Press the back arrow button on
the touchscreen to return to the previous menu.
• AUX Volume Offset — If Equipped
This feature provides the ability to tune the
audio level for portable devices connected
through the AUX input. To make your selection,
press the AUX Volume Match button on the
touchscreen, choose a level from –3 to +3.
Press the back arrow button on the touchscreen
to return to the previous menu.
• Loudness — If Equipped
Loudness improves sound quality at lower vol-
umes. To make your selection, press the "Loud-
ness" button on the touchscreen, then choose
"Yes" or "No." Press the back arrow button on
the touchscreen to return to the previous menu.
Phone/Bluetooth®
After pressing the "Phone/Bluetooth®" button
on the touchscreen the following settings will be
available:
• Paired Phones
This feature shows which phones are paired to
the Phone/Bluetooth® system. For further infor-
mation, refer to the Uconnect® Supplement
Manual.
153