Table of Contents
Advertisement
• Touchscreen Beep
When in this display, you may turn on or shut off
the sound heard when a touchscreen button
(button on the touchscreen) is pressed. Press
the "Touchscreen Beep" button on the touch-
screen until a check-mark appears next to the
setting, showing that setting has been selected.
Press the back arrow button on the touchscreen
to return to the previous menu.
• Control Screen Time-Out — If Equipped
When this feature is selected, the Controls
Screen will stay open for five seconds before
the screen times out. With the feature dese-
lected, the screen will stay open until it is
manually closed. Press the Control Screen
Time-Out button on the touchscreen until a
check-mark appears next to the setting, show-
ing that setting has been selected. Press the
back arrow button on the touchscreen to return
to the previous menu.
• Navigation Turn-By-Turn In Cluster — If
Equipped
When this feature is selected, the turn-by-turn
directions will appear in the display as the
146
vehicle approaches a designated turn within a
programmed route. To make your selection,
press the "Navigation Turn-By-Turn In Cluster"
button on the touchscreen, until a check-mark
appears next to the setting, showing that setting
has been selected. Press the back arrow button
on the touchscreen to return to the previous
menu.
Units
After pressing the "Units" button on the touch-
screen the following settings will be available:
• Units
When in this display, you may select each unit
of measure independently displayed in the
Driver Information Display (DID), and naviga-
tion system (if equipped). The following select-
able units of measure are listed below:
• Speed
Select from: "MPH" or "km/h."
• Distance
Select from: "mi" or "km."
• Fuel Consumption
Select from: "MPG" (US), "MPG" (UK), "L/100
km" or "km/L."
• Capacity
Select from: "gal" (US), "gal" (UK), or "L."
• Pressure
Select from: "psi," "kPa," or "bar."
• Temperature
Select from: "°C," or "°F."
• Power
Select from: "HP" (US), "HP" (UK), and "kW."
• Torque
Select from: "lb-ft" or "Nm."
• After the desired setting has been selected,
press the back arrow button on the touch-
screen to return to the previous menu.
Advertisement
Chapters
Table of Contents
