Dodge Challenger 2015 Operating Information Manual page 172

mum temperature settings for best windshield
and side window defrosting and defogging. Per-
forming this function will cause the ATC to
switch into manual mode. If the front defrost
mode is turned off the climate system will return
the previous setting.
6. Rear Defrost Button
Press and release this button to turn on the rear
window defroster and the heated outside mir-
rors (if equipped). An indicator will illuminate
when the rear window defroster is on. The rear
window defroster automatically turns off after 10
minutes.
CAUTION!
Failure to follow these cautions can cause
damage to the heating elements:
• Use care when washing the inside of the
rear window. Do not use abrasive window
cleaners on the interior surface of the
window. Use a soft cloth and a mild wash-
ing solution, wiping parallel to the heating
CAUTION! (Continued)
elements. Labels can be peeled off after
soaking with warm water.
• Do not use scrapers, sharp instruments, or
abrasive window cleaners on the interior
surface of the window.
• Keep all objects a safe distance from the
window.
7. Passenger Temperature Control Up But-
ton (Uconnect® 8.4 Only)
Provides the passenger with independent tem-
perature control. Push the button on the face-
plate for warmer temperature settings or on the
touchscreen, press and slide the temperature
bar button towards the red arrow for warmer
temperature settings.
NOTE:
Pressing this button while in Sync mode will
automatically exit Sync.
(Continued)
8. Passenger Temperature Control Down
Button (Uconnect® 8.4 Radio Only)
Provides the passenger with independent tem-
perature control. Push the button on the face-
plate for cooler temperature settings or on the
touchscreen, press and slide the temperature
bar button towards the blue arrow for cooler
temperature settings.
NOTE:
Pressing this button while in Sync mode will
automatically exit Sync.
9. SYNC
Press the Sync button on the touchscreen to
toggle the Sync feature On/Off. The Sync indi-
cator is illuminated when this feature is enabled.
Sync is used to synchronize the passenger
temperature setting with the driver temperature
setting. Changing the passenger temperature
setting while in Sync will automatically exit this
feature.
10. Blower Control
Blower control is used to regulate the amount of
air forced through the climate system. There are
169