Table of Contents
Advertisement
Recirculation
When outside air contains smoke,
odors, or high humidity, or if rapid
cooling is desired, you may wish to
recirculate interior air by pressing
the Recirculation control button.
The recirculation indicator will illuminate when
this button is selected. Press the button a
second time to turn off the Recirculation mode
and allow outside air into the vehicle.
NOTE:
In cold weather, use of Recirculation mode
may lead to excessive window fogging. The
recirculation feature may be unavailable
(button on touchscreen greyed out) if con-
ditions exist that could create fogging on the
inside of the windshield. On systems with
Manual Climate Controls, the Recirculation
mode is not allowed in Defrost mode to
improve window clearing operation. Recir-
culation will be disabled automatically if this
mode is selected. Attempting to use Recir-
culation while in this mode will cause the
LED in the control button to blink and then
turn off.
172
Automatic Temperature Control
(ATC)
Automatic Operation
1. Push the AUTO button on the faceplate or
press the "AUTO" button on the touch-
screen.
2. Next, adjust the temperature you would like
the system to maintain by adjusting the
driver and passenger temperature buttons
on the faceplate or buttons on the touch-
screen. Once the desired temperature is
displayed, the system will achieve and auto-
matically maintain that comfort level.
3. When the system is set up for your comfort
level, it is not necessary to change the
temperature. You will experience the great-
est efficiency by simply allowing the system
to function automatically.
NOTE:
• It is not necessary to move the tempera-
ture settings. The system automatically
adjusts the temperature, mode, and
blower speed to provide comfort as
quickly as possible.
• The temperature can be displayed in U.S.
or
Metric
units
by
Uconnect® customer-programmable fea-
ture. Refer to the "Uconnect® System
Settings" in this section of the manual.
To provide you with maximum comfort in the
Automatic mode, during cold start-ups the
blower fan will remain on low until the engine
warms up. The blower will increase in speed
and transition into Auto mode.
Manual Operation Override
The system allows for manual selection of
blower speed, air distribution mode, A/C status
and recirculation control.
The blower fan speed can be set to any fixed
speed by adjusting the blower control. The fan
will now operate at a fixed speed until additional
speeds are selected. This allows the front oc-
cupants to control the volume of air circulated in
the vehicle and cancel the Auto mode.
The operator can also select the direction of the
airflow by selecting one of the available mode
selecting
the
Advertisement
Chapters
Table of Contents
