Weekly Maintenance - Precor TRM 800 Series Assembling And Maintaining Manual

54
Status light
appearance
Pulsing yellow The treadmill has detected

Weekly Maintenance

Perform the following maintenance tasks every week:
1.
2. Clean the floor under the equipment using a vacuum
3. When the floor is completely dry, reconnect the power
4. Inspect the power cord to verify that it is not pinched
5. Test all console functions, including heart rate monitoring
6. Verify that the unit sits squarely on the floor. All of its feet
Assembling and Maintaining TRM 800-Series Treadmills
Meaning
an error, has been unable
to recover from the error,
and has taken itself out of
service.
Elevate the tread to maximum incline, then turn off the
power switch or circuit breaker and unplug the unit from
the wall outlet.
cleaner or a damp mop.
and return the treadmill to the level position.
under the equipment or between any two moving parts.
features.
should be touching the floor and the unit should not rock
or wobble when in use. If not, re-level it as described in
Leveling the Unit.
Action required
Power-cycle the
treadmill (switch it off,
wait 30 seconds, then
switch it on again). If
the error occurs again,
check the console's
event log for more
information, then
contact Precor
Customer Support.