Precor TRM 800 Series Assembling And Maintaining Manual page 34

32
To level the treadmill:
1.
If the treadmill ...
Is level
Is not level
2. Position yourself next to the adjustable rear feet.
3. Using a ³ ₄-inch open-end wrench, loosen the jam nuts on
4. Ask your assistant to lift the rear portion of the treadmill.
5. Using the ³ ₄-inch open-end wrench, adjust the feet as
6. Repeat steps 2 through 5 until the treadmill is level.
7. If necessary, adjust the rear feet so that the user's weight
8. Using the ³ ₄-inch open-end wrench, tighten the jam nuts
Assembling and Maintaining TRM 800-Series Treadmills
Place a bubble level across the running belt to see
whether the treadmill is level.
Figure 18: Bubble level placement on running belt
Then ...
Make sure the jam nuts on the adjustable feet
are tightened securely, then skip to the next
procedure.
Continue with step 2.
the rear feet.
Important: Be sure that your assistant uses proper lifting
techniques in the following step.
needed.
is distributed evenly on the treadmill.
on the two adjustable feet so that they are secure against
the treadmill frame.