Precor TRM 800 Series Assembling And Maintaining Manual page 21

Assembling the Treadmill
Hardware Kit (not to scale)
The hardware kit shipped with this equipment contains the
fasteners and other hardware components shown in the
following table. Before you begin assembly, make sure that
your hardware kit is complete. If not, please contact Precor
Customer Support.
Fasteners
Corner cover (2)
Access cover (2)
Note: Retrieve the cables and other hardware shipped with
the console before you begin installation.
³ ₈-inch × 1-inch buttonhead
screws
¹ ₄-inch × 1-inch buttonhead
screws
¹ ₄-inch × ³ ₄-inch panhead
self-tapping screws
¹ ₄-inch × 1¹ ₂-inch panhead
self-tapping screws
³ ₈-inch narrow flat washers
¹ ₄-inch × ³ ₈-inch shoulder
bolt
Square plastic grommet
19
Quantity
12
4
6
2
12
4
2