Job Build - Canon imageRunner 2220i User Manual

Job Build

This mode enables you to scan originals that have too many pages to be placed at
once, by dividing them into multiple batches. You can use both the feeder and the
platen glass for scanning. The originals are sent as one document, after all the
batches have been scanned.
IMPORTANT
•
When the machine is operating in the Job Build mode, you cannot use the Document
Size Select (Other Size, Long Strip Original) mode.
•
When the machine is operating in the Job Build mode, you cannot use Direct Sending for
Fax.
•
You cannot change the scan settings while scanning originals in the Job Build mode,
except for the Document Size Select (Auto), Manual Document Size Select, Type of
Original, or Scanning Exposure. You must make the necessary settings beforehand,
according to the type of original and desired scanning mode.
•
If you place the originals in the feeder, remove each original from the original output area
when scanning is complete.
•
The maximum number of pages that can be sent at one time is 500.
NOTE
•
If you place different-sized originals in the feeder, set the Different Size Originals mode.
•
To scan one-sided and two-sided originals as two-sided, set the Two-Sided Original
mode before scanning if the first sheet is two-sided. To scan the next batch of originals,
set or cancel the Two-Sided Original mode according to the type of original.
1
Place your original © specify the destination.
2
Press the Scan Settings drop-down list © press [Option].
Changing the Scan Settings
1
1-115