4
4-52
Storing New Addresses (Store/Edit Address Book)
G If the screen below is displayed:
❑
Press [User Name] © enter the user name © press [OK].
You can enter up to 128 characters for the user name.
The Network Password Entry screen is displayed if either one of the following
is true:
If Login Information in Register LDAP Server in System Settings (from the
Additional Functions screen) is set to 'Use', and <Display authentication
dialog when searching> is set to 'On'.
If the user name, password, and domain name specified in Register LDAP
Server in System Settings (from the Additional Functions screen) are incorrect.
❑
Press [Password] © enter the password © press [OK].
You can enter up to 24 characters for the password.
You can also use
clear your entry.
NOTE
•
For instructions on how to enter characters on the touch panel display, see Chapter
1, "Before You Start Using This Machine," in the Reference Guide.
•
After pressing [OK], the password that you entered appears as asterisks (*****) on
the Enter Network Password screen.
-
(numeric keys) to enter numbers, and
0
9
(Clear) to
C