Canon imageRunner 2220i User Manual page 40

2
Press [TX Settings] under <Common Settings> © press [Unit
Name].
NOTE
If the desired setting is not displayed, press [M] or [L] to scroll to the desired
setting.
3
Enter the name © press [OK].
You can enter up to 24 characters for the unit's name.
The selected mode is set.
NOTE
For details on how to enter characters on the touch panel display, see Chapter 1,
"Before You Start Using This Machine," in the Reference Guide.
4
Press [Done] repeatedly until the Send Basic Features screen
appears.
Things You Must Do Before Using This Machine
1
1-19