Canon imageRunner 2220i User Manual page 283

8
4
4-8 Storing New Addresses (Store/Edit Address Book)
Enter a fax number using
[Pause]: Press to insert a pause of several seconds in the telephone number that
you are dialing. <p> is displayed if you insert a pause between the numbers, and
<P> is displayed if you insert a pause at the end of the number. When dialing an
overseas number, insert a pause after the access number, and also at the end of
the telephone number. (See "Setting the Pause Time (Pause Time)," on p. 3-49.)
[Tone]: Press when directly calling an extension line connected to a Private
Branch Exchange (PBX) that accepts only touch tone signals from a dial line.
(See "Using Fax Information Services," on p. 2-8.)
[ ] [ ]: Use to move the cursor.
[Backspace]: Press when a wrong number is entered. The last number entered is
deleted, enabling you to enter the correct number.
[Space]: Press to insert a space between the area code and the local telephone
number.
[+]: Press to insert a country code in front of the telephone number.
[Option]: Press to specify a subaddress, password, ECM transmission, sending
speed, and long distance. Specify these settings to suit your needs.
[PIN Code]: Press to use the PIN code. (See "Setting the PIN Code Position," on
p. 1-187.)
To delete the number you entered, press
IMPORTANT
Pauses and Spaces cannot be entered before telephone numbers.
NOTE
•
The telephone number can have up to 120 digits.
•
Pauses entered at the end of dialed telephone numbers are always 10 seconds
long.
- , , and
0 9
(Clear).
C
(numeric keys).