Canon imageRunner 2220i User Manual page 155

1
5
1-134 Changing the Scan Settings
Press [No] if you do not want to store the mode.
When storing is complete, the message <Stored in memory.> appears for
approximately two seconds on the touch panel display.
The color of the user preset key storing the scanning mode changes and the
stored modes are displayed.
G If you select an occupied user preset key (settings have already
been stored):
❑
Press [Yes] when the confirmation message appears asking whether you want
to overwrite the setting.
Press [No] if you do not want to overwrite the current mode.
When storing is complete, the message <Stored in memory.> appears for
approximately two seconds on the touch panel display.
The stored modes are displayed.
Press [Done] © [OK].
The display returns to the Send Basic Features screen.