Canon imageRunner 2220i User Manual page 146

NOTE
•
To enter values in millimeters, press [mm].
•
The default settings are '3/8" (10 mm)' for [Center], and '1/8" (4 mm)' for [Top],
[Left], [Right], [Bottom], and [Sides]. The maximum Frame Erase value is '1-15/16"
(50 mm)'.
•
If you enter values outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
6
Select the size of the bound original when it is open © press
[OK].
The specified mode is set and the display returns to the Special Features screen.
NOTE
To select an A or B series paper size, press [A/B-size].
7
Press [Done] © [OK].
The display returns to the Send Basic Features screen.
8
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display. Press
is complete, press [Done].
Scanning starts.
When scanning is complete, the document is sent to the specified destination.
(Start) once for each original. When scanning
Changing the Scan Settings
1
1-125