1
2
3
1-150
Configuring Send Settings (Send Settings)
NOTE
•
For details on specifying addresses using the Address Book, see "Specifying a
Destination Using the Address Book (Address Book)," on p. 1-37.
•
For details on specifying addresses not registered in the Address Book, see
"Specifying a Destination Not Registered in the Address Book (New Address)," on
p. 1-39.
•
For details on specifying addresses using the one-touch buttons, see "Specifying a
Destination Using One-Touch Buttons (One-Touch Buttons)," on p. 1-64.
•
For details on specifying addresses and settings using the favorites buttons, see
"Configuring the Favorites Buttons (Favorites Buttons)," on p. 1-66.
•
For details on specifying addresses using the directory listing on the server
(LDAP), see "Searching a Destination via a Server (Search on Server)," on p. 1-68.
•
For details on scan settings, see "Selecting a Scan Mode," on p. 1-83.
Press [Sender's Names (TTI)].
Select the sender's name © press [OK].
'00' is set in the Sender's Names list beforehand.