3
1
4
5
1-116
Changing the Scan Settings
Press [Special Features] © [Job Build].
The specified mode is set and the display returns to the Special Features screen.
Press [Done] © [OK].
The display returns to the Send Basic Features screen.
Press
(Start).
Scanning starts.
NOTE
•
To cancel scanning, press [Cancel] or
To cancel this setting, press [Special Features] © [Job Build].
•
To cancel the scan setting, press the Scan Settings drop-down list © press [Option]
•
© [Cancel].
•
To cancel all settings at once, press
Standard Scanning mode.)
(Stop).
(Reset). (The machine returns to the