Canon imageRunner 2220i User Manual page 187

8
1
9
1-166 Configuring Send Settings (Send Settings)
Press [Reply-to].
Select a reply-to address © press [OK].
If Access Number Management for an Address Book is set to 'On', and you want
select a destination that is stored with an access number or in a private address
book, press [Access Number] © enter the access number to specify the
address © press [OK]. If you press [No Access Number], the destinations that
are not managed with the Access Number Setting are displayed. (See "Storing
New Addresses (Store/Edit Address Book)," on p. 4-5.)
The address specified here will be set as the I-Fax address when the recipient of
the I-Fax replies. If you send I-Fax documents to another imageRUNNER series
machine, a confirmation mail that the machine received them in Full mode will
also be sent to the address specified here.
Store reply-to addresses in the address book beforehand. (See "Storing E-mail
Addresses," on p. 4-13.)