P-79X Access And Login - ZyXEL Communications P-793H v3 User Manual

25.2 P-79X Access and Login

I forgot the IP address for the P-79X.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, you might get the IP address of the P-79X by
2
looking up the IP address of the default gateway for your computer. To do this in most Windows
computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default
Gateway might be the IP address of the P-79X (it depends on the network), so enter this IP
address in your Internet browser.
If this does not work, you have to reset the device to its factory defaults. See
3
18.
I forgot the password.
The default admin password is 1234, and the default user password is user.
1
If this does not work, you have to reset the device to its factory defaults. See
2
18.
I cannot see or access the Login screen in the web configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address
• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for
forgot the IP address for the P-79X.
Check the hardware connections, and make sure the LEDs are behaving as expected. See the Quick
2
Start Guide.
Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java
3
enabled. See
• If there is a DHCP server on your network, make sure your computer is using a dynamic IP
address. See
• If there is no DHCP server on your network, make sure your computer's IP address is in the
same subnet as the P-79X. See
Reset the device to its factory defaults, and try to access the P-79X with the default IP address. See
4
Section 1.5 on page
Chapter 25 Troubleshooting
(Section 8.2 on page
Appendix D on page 264.
Appendix C on page
Appendix C on page
18.
P-79X Series User's Guide
75), use the new IP address.
244. Your P-79X is a DHCP server by default.
244.
233
Section 1.5 on page
Section 1.5 on page
I