Yamaha RAPTOR YFM125RA Service Manual page 65

1. Tool kit
2. Air filter case
3. Tail/brake light
4. Tail/brake light lead
5. Battery
6. Starter relay lead
7. Starter relay
8. Battery positive lead
9. Battery negative lead
10.AC magneto coupler
11.Starter motor lead
A. Clamp the tail/brake light lead.
B. Do not clamp.
C. Set the insulator lock on the wire harness
behind the fixed point.
D. Pass the starter relay lead under the
starter motor lead.
E. After connecting the wire harness and
each electric part, the length between the
air filter and AC magneto coupler should
be 185 mm (7.28 in) on straight line.
F. ø20
G. After connecting the battery negative lead,
push the sag in the box.
H. Insert the starter relay all the way into the
rib on the air filter side.
2-42
CABLE ROUTING