9. Tighten:
• Camshaft sprocket bolts
Camshaft sprocket bolt
26 Nm (2.6 m·kgf, 19 ft·lbf)
ECA13750
Be sure to tighten the camshaft sprocket
bolts to the specified torque to avoid the
possibility of the bolts coming loose and
damaging the engine.
10. Measure:
• Valve clearance
Out of specification → Adjust.
Refer to "ADJUSTING THE VALVE
CLEARANCE" on page 3-4.
11. Install:
• Gasket
New
• Plate "1"
Plate bolt
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
TIP
• Make sure the projection "a" of the gasket
face toward the upper side of the vehicle.
• Make sure that the blunt-edged corner "b" of
the plate is facing upward.
5-12
CYLINDER HEAD