Yamaha RAPTOR YFM125RA Service Manual page 16

Checking the connections
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
• Lead
• Coupler
• Connector
ECA16780
• When disconnecting a coupler, release
the coupler lock, hold both sections of
the coupler securely, and then disconnect
the coupler.
• There are many types of coupler locks;
therefore, be sure to check the type of
coupler lock before disconnecting the
coupler.
ECA16790
When disconnecting a connector, do not
pull the leads. Hold both sections of the
connector securely, and then disconnect
the connector.
2. Check:
• Lead
• Coupler
• Connector
Moisture → Dry with an air blower.
Rust/stains → Connect and disconnect
several times.
BASIC SERVICE INFORMATION
3. Check:
• All connections
Loose connection → Connect properly.
TIP
• If the pin "1" on the terminal is flattened,
bend it up.
• After disassembling and assembling a cou-
pler, pull on the leads to make sure that they
are installed securely.
4. Connect:
• Lead
• Coupler
• Connector
TIP
• When connecting a coupler or connector,
push both sections of the coupler or connec-
tor together until they are connected
securely.
• Make sure all connections are tight.
1-7
1