Results 1-10 of 10

Needles & Threading the Machine Specifications To Thread the Machine Timing of the Looper to the Needles

Needles & Threading the Machine Stitch Type Specifications Timing of the Looper to the Needles

Needles Needles & Threading the Machine Angle and Height for Installing the Looper Timing of the Looper to the Needles

Table of Contents 使用針と糸の通し方 / Needles & Threading the Machine 糸の通し方 / Threading (Wx8803-1S Series) 糸の通し方 / Threading (MMX Series) 飾り糸ル−パ−機構の調整 / Adjusting the Spreaders Mechanism 5-1 飾り糸ル−パ−調整方法 / Adjusting the Spreaders 飾り糸ル−パ−の位置 / Timing of Spreaders 偏平縫いへの変更手順 / Changing to the Coverstitch Machine

Needles Needles & Threading the Machine Threading the Machine Timing of the Looper to the Needles

How to Use the Thread Trimmer Adjusting the Thread Trimmer Solenoid Position of the Movable Knife and the Stationary Knife Adjusting the Thread Trimmer

Needles & Threading the Machine Needles Machine Speed & Direction in Which the Machine Pulley Runs Timing of the Looper to the Needle Needle Height

Needles

Table of Contents To Adjust Amount of Front-To-Back Movement (Stitch Length) on the Top Feed Dog in Relation to the Main Feed Dog To Adjust the Clearance between the Top Feed Dog and the Main Feed Dog To Adjust the Top Feed Dog Pressure Adjusting the Standard Position of the Top Feed Dog Adjusting the Top Feed Dog Timing