Needles & Threading The Machine; Needles; Replacing The Needle; To Thread The Machine - KANSAI SPECIAL PX302-4W Instruction

【1】NEEDLES & THREADING THE MACHINE

1 1 1 1 - - - - 1 Needles

1 Needles
1 Needles 1 Needles
UO163 of Schmetz or Organ
Select the proper needle for the fabric and thread.
< Comparison table of needle sizes >
Schmetz UY163GAS
Organ UO163

1 1 1 1 - - - - 2 Replacing the needle

2 Replacing the needle
2 Replacing the needle 2 Replacing the needle
When replacing the needle, check the needle carefully
to see that the scarf is turned to the rear of the
machine (see the illustration).
< Note >
When replacing the needle, be sure to turn off the
machine. A clutch motor continues running for a while
after the machine is turned off.
pressing the pedal until the machine stops.

1 1 1 1 - - - - 3 To thread the machine

3 To thread the machine 3 To thread the machine 3 To thread the machine
Thread the machine correctly by referring to the illustration below.
threading may cause skip stitching, thread breakage and/or uneven stitch formation.
A，B ... Needle threads
C，D ... Looper threads
Nm65 Nm70 Nm75
#9 #10 #11
Therefore keep on
1
Nm80 Nm90
#12 #14
Incorrect