Needles & Threading The Machine; Needles; Replacing The Needle; Threading The Machine - KANSAI SPECIAL HDX Series Instruction

【1】NEEDLES & THREADING THE MACHINE

1-1 Needles

Needle of Schmetz or Organ.
Select the proper needle for the fabric and thread.
< Needles and needle size >
HDX1101･････DR2
■
HDX1102･････UY143GS Nm200，#25
■

1-2 Replacing the needle

When replace the needle, check the needle carefully to see
that the scarf is turned to the rear of the machine (see the
illustration). Then install the needle correctly.
< Note >
Before replacing the needle, be sure to turn off the
machine. A clutch motor continues running for a while
after the machine is turned off.
Therefore keep on pressing the pedal until the machine
stops.

1-3 Threading the machine

Thread the machine correctly by referring to the illustration below.
Threading the machine incorrectly may cause skip stitching, thread breakage and/or
uneven stitch formation.
A ... Needle threads
B ... Looper thread
＜HDX1101＞
Nm200，#25
A ... Needle threads
B ... Looper thread
1
＜HDX1102＞
H D
H D
X
X
s e r i e s
s e r i e s